Instrumentation Craftsperson

Instrumentation

Instrumentation Craftsperson - Apprenticeships

The work of an Instrumentation craftsperson involves the maintenance and repair of all instruments used in the measurement and control of process variables (e.g. in the chemical industry to measure and control the temperature, pressure and flow, as appropriate, in various points of the process).

The instrumentation craftsperson carries out installation, maintenance and calibration of measuring instruments, sensors, transmitting and controlling devices and systems associated with the measurement, control and protection of physical quantities found in these industries.

The measurement and control of these quantities enables products to be produced to specifi cation, taking account of the safety of personnel, plant and equipment and the protection of the environment. Instrumentation craftspersons are employed in the installation and maintenance of measurement and control equipment in pharmaceutical, food and other industries.

Note: Experience has shown that higher grades of entry than those suggested by SOLAS are preferred for the Electrical Apprenticeship, due to the technical nature of the Electrical trade.

Employers typically seek applicants who have completed Leaving Cert including Maths (with at least a grade C3 in Ordinary Level Maths) and preferably Physics.

Work Aspects

  • Learning and developing new practical craft-related skills, knowledge and competence
  • Working with and learning from experienced craftspersons
  • Working with electricity and electronics
  • Comply with Health and Safety requirements
  • Using mathematics to solve technical or scientific problems
  • Being responsible for controlling or adjusting equipment
  • Working on machines/processes
  • Understanding technical drawings and diagrams
  • Accuracy and attention to detail
  • Being accurate with numbers in counting, measuring and arithmetic
  • Keeping accurate records of all calibrations or reports
  • Being well organised and careful with practical tasks
  • Taking responsibility for their own learning, including the allocation of study time
  • Being physically active
  • Working with a variety of specialised hand tools, power tools and equipment
  • Passing all your phase exams (theory, practicals skills demonstration)
  • Earning as you learn

Phase 1: With Employer

  • Induction Training
  • Introduction to Health & Safety
  • Introduction to Tools & Equipment
  • Introduction to Basic Skills

Phase 2: Delivered in Training Centre (24 weeks)
Course Content:

  • Induction
  • Basic Engineering
  • Electrical 1
  • Electronics 1
  • Measurements – Pressure
  • Measurements – Flow
  • Measurements – Level
  • Measurements – Temperature
  • Final Control Elements
  • Automatic Control
  • Related Theory

Phase 3: With Employer 

Work Based Training and Assessments

Phase 4: Delivered in Educational College (11 weeks)
Course Content:

  • Electrical
  • Electronics 2
  • Measurements
  • Final Control Elements
  • Automatic Control
  • Related Theory

Phase 5: With Employer

Work Based Training and Assessments

Phase 6: Delivered in Educational College (11 weeks)

Course Content:

  • Digital Electronics
  • Measurements
  • Control Systems
  • Related Theory

Phase 7: With Employer 

Work Based Training and Assessments

The overall duration of this apprenticeship is a minimum of 4 years provided all phases are successfully completed.

On successful completion of the programme the learner is awarded a Level 6 Advanced Certificate Craft – Instrumentation.

As an Instrumentation craftsperson you will need to be physically active and to be able to work with your hands.

An awareness of health and safety and good housekeeping is essential as well as attention to detail and an eye for the aesthetic.

The Instrumentation craftsperson must have the ability to:

  • Plan and organise
  • Communicate effectively
  • Solve problems
  • Work independently and as part of a team
  • Show a positive attitude
  • Recognise the need for good customer relations
  • Demonstrate good work practices including time keeping, tidiness, responsibility, quality awareness and safety awareness

Note: A person wishing to become an apprentice Instrumentation Craftsperson must pass a colour–vision test approved by SOLAS.

The minimum age at which the employment of an apprentice may commence is 16 years of age.
The minimum educational requirements are:
1. Grade D in five subjects in the Department of Education & Skills Junior Certificate Examination or an approved equivalent,
or
2. The successful completion of an approved Pre-Apprenticeship course
or
3. Three years’ work experience gained over sixteen years of age in a relevant designated industrial activity as SOLAS shall deem acceptable

Note: These are the current approved minimum educational requirements for apprenticeship programmes, however, previous experience of the following subjects would be an advantage but not essential:

  • Technical Drawing/Graphics
  • Physics
  • Technology
  • Mathematics

Note: Experience has shown that higher grades of entry than those suggested by SOLAS are preferred for the Electrical Apprenticeship, due to the technical nature of the Electrical trade.

Employers typically seek applicants who have completed Leaving Cert including Maths (with at least a grade C3 in Ordinary Level Maths) and preferably Physics.

You must obtain employment as an apprentice in your chosen occupation.

  • The employer must be approved to train apprentices.
  • The employer must register you as an apprentice within two weeks of recruitment.

Note: Instrumentation Apprenticeship applicants are required to pass a colour vision test approved by SOLAS.

On successful completion of the apprenticeship programme, apprentices are qualified to work within the recognised trade or profession.

Where apprentices and craftspersons have the necessary ability, initiative and basic qualifications, opportunities are available for advancement. These include advanced technology courses and management courses which are available in Institutes of Technology, Schools of Management and Professional Institutes.

This apprenticeship is an obvious progression route to the electrical or electronic engineering Level 8 Degree path.

Many craftspersons use their apprenticeship qualification as a platform to launch careers such as engineers, managers, owners of businesses, teachers and instructors amongst others.